The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support STM Tuned

2G I NEED replacement rotors - Baer Track and Cobra bbk questions

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

I’ve reached out to Adams Rotors and they can’t tell me if they have a rotor that matches the specs of the Baer engineering diagram.

I picked up a Duralast rotor for a 98 Cobra from Autozone and it is not surprisingly a dimensional match to the Oreilly rotor.

I’ve also emailed EBC and Centric, with centric I explicitly asked if the part #s provided above by Talon77 have the same hat offset as the Baer rotors. Neither company has responded. At this point I feel like it’s definitive that the Baer rotors are the only option for a 1pc rotor on a 2g application.
 
Can you just go eradispeed 2 piece then? More expensive but I believe are available. That is what I have and will soon be changing so I can put on my Stoprech setup. Rotors and calipers.

I will admit my baer setup with the 2 piece rotors works flawless. Lighter than the stoptechs and sometimes has me thinking to reconsider.
 
Can you just go eradispeed 2 piece then? More expensive but I believe are available. That is what I have and will soon be changing so I can put on my Stoprech setup. Rotors and calipers.

I will admit my baer setup with the 2 piece rotors works flawless. Lighter than the stoptechs and sometimes has me thinking to reconsider.

I hadn’t heard of these before, I did contact Coleman and for them to build me 2 piece rotors in the cheapest configuration replacement rings would only save me $20 each over Baer 1pc rotors and I of course have the upfront cost of about $900 to get the hats, hardware, and first set of rings. I’ll look into these and see if it’s a viable option.
 
I would call Baer up and inquire about the eradispeed 2 piece rotors that came with the old 2g kit. I am sure those rotors are still available. Mines are slotted and not drilled 2 piece and they are excellent.
 
I don’t understand how someone gets them to fit and others don’t?
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top