The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support RTM Racing
Please Support Morrison Fabrication

2G injector size 76hta

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Kyky819

5+ Year Contributor
53
7
Aug 31, 2018
Otis orchards, Washington
hi I have a 95 eagle talon tsi awd 6bolt swap. I just got a fp green xl (76hta) and was looking at the fic 1200cc high impedance injectors but I feel like those are going to be to big. I have dsmlink v3 and will be running speed density. any help is appreciated thank you.
 
Best answer depends on what type of fuel you plan on using & desired hp goals. They may be on the big side or close to the right size.
 
im planning on 93 oct/meth, and I want to see around 400 awhp. ill be running a wally 255,fpr, and AN line from the fuel filter to the rail
 
I plan on putting the turbo on now. Could I get away with running my fix 650s at low boost? Need to save for the rest of my fuel system
 
Watch your WB & as long as you do not go lean you can use the 650's. Personal experience say this is really hard to do though & the wise thing would be to wait until you have everything & are ready.
 
If you put on the new turbo, just don't push the car at all until you get the fuel system setup. This way, you'll find out if that turbo is even good or not, and you'll save the headache down the road.
 
Okay I think I'm kinda overthinking this but would a singe Wally 255 rewierd be enough fuel for my turbo at around 30psi? I read over the value page posted above but still a little confused
 
Okay I think I'm kinda overthinking this but would a singe Wally 255 rewired be enough fuel for my turbo at around 30psi?

I think it would if you are talking gasoline for the fuel, plus methanol injection.
Can you get 93 octane there in the Spokane area?

The FIC 1200 High-Z injectors are what is recommended for your car by this chart written up by ECMTuning:
http://www.ecmtuning.com/product_info.php?products_id=72
I think they'd be really good.
 
Last edited:
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top