The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support RTM Racing
Please Support Rix Racing

TERRIBLE suspension noise. Please help!

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Its not in the picture you postedi it would be to the upper right of that pic on top of the knuckle

Thanks :)
Is it this one ? :)
 

Attachments

  • D0E875C2-F0F7-4217-BAC5-A5136936DDAE.jpeg
    D0E875C2-F0F7-4217-BAC5-A5136936DDAE.jpeg
    66.3 KB · Views: 72
Up guys i need your help please, my rear suspensions are making big noise i dont feel safe while driving...
Thanks :)
 
Up guys i need your help please, my rear suspensions are making big noise i dont feel safe while driving...
Thanks :)
have you checked your bushes or even if its the upper mounting for the shock? its more likely to be the suspension arm bushes then the shock mounting bush but still worth a check
 
Yes i’ve already check all rear bushes and they looks great, but i have a big noise like if something is moving, i have this noise only when i drive in bad roads, with holes
Thanks you :)
 
Then all i can say is grab everything and check further, if its still showing nothing then maybe you got a dead shock
 
Shocks are both news, it’s since i changed them and put lower springs that the noise came...
 
Yes i think too !
I watched many diagrams for rear shocks, mine looks to be good (as diagrams).
I’ve seen someone in DSMTuners says that the top bolt is difficult to put properly, and the spring couldn’t be properly tensionned.
Someone have already seen that?
 
all the bolts are easy to get to and do up, its just poor person skills normally, lack of skill and not thinking correctly most of the time, before i used to torque it all i didalot up tight, never once did i have an issue before,

nothing really is hard to do up on this chassis, a little tricky sure but always possible 98% of the time,

so re check your work and if unsure go ask someone for help who can assist you further to check your work you did to confirm its all ok, if you did it all up ok then the shocks are bad from the box or you are riding on your bump stops which is bad, without having the car in front of me or us we can only give you pointers, so spend hours if needs be taking it all apart and checking and this will make you better at working on cars from more knowledge and learning in future
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top