The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support Morrison Fabrication

Best Shot of your DSM

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
I need to get some more recent with carbonetics hatch, but these will do....LOL.
 
I finally got some time and brought the car out to drive. It was dead cold outside when i took the pictures (gf's P20 Pro), and it is winter in my country, so the car was a bit dirty :c It still has the previous owner's appearance, i hate the front grills tbh, but i am planning to spend time on it in 2019 and make it super sexy:p

By the way, i would very much appreciate if anyone knew what kind of wheel is this on the car? I looked super carefully, but i just could not find anything on the wheels, no brand name/specs - nothing, blank. The tires on it is 235/45 R17 that is all i know.

You must be logged in to view this image or video.
You must be logged in to view this image or video.

You must be logged in to view this image or video.
 
Last edited:
Guy down the road has something similar to those on his Dsm I think, not sure off hand the brand other than they are a generic design used by several companies.
 
Those are Yamaha R6 coils from around 2003-2006 or so, the R1 should also work, I happened to have eight of them in my toolbox from a service bulletin that I performed on a few customer units with low miles on them, funny enough the Yamaha repair was to replace them with Mitsubishi coils on the bike, so I kept these ones with the plan to use them on the Dsm at some point, they do fit great with no trimming or modification to them at all. They are running off of the Dynatek box which is actually designed to run the Yamaha R1 to begin with. The waterneck I made because I just couldnt stand the ugly bulky looking stock unit anymore, it was the only stock part still in plain sight and they are just plain ugly from the factory.
 
Some absolutely fantastic cars, people!! When I look at them I'm always like "Gooddamn they look so good and sexy I wish I had one!". Then I remember I have one sitting in my driveway ROFL. Just goes to show how eye catching and beautiful these cars are. But also massive props to everyone for keeping them up and running; we all know it's not as easy as some may think. Sorry for the comment without picture, I think I've already posted one of mine here, but I really wanted to put this out there.

Keep 'em comin' fellas!
 
Thank you so much! 130,ish thousand miles on body/chasis with 6 bolt swap/build maybe 500 miles on it. I thought my buddy had driver it while he lived in Alabama but it sat in his mom's garage for 10 years so I got a great deal @ $3k
 
Arent you the one behind the hotel at the shootout this year trying to unload it off of a trailer and it was giving you trouble dragging the front bumper?

I was behind the hotel but didn't really have any issues getting it out of the trailer. It was parked at the end of the red roof each night.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top