The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support Morrison Fabrication

ECUflash Need to change maf size in ecu flash?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bw2277

Proven Member
48
0
Mar 18, 2013
north bend, Oregon
I have tried searching for this issue with nothing found so...my question is im running a 3" gm maf and tuning with ecu flash, do I need to adjust my maf size or scaling table using it in blow thru setup?
 
Hate to revive an old thread but can anybody answer this still? I'm running a 3" GM Maf with a MAFT in a blowthru setup. The MAFT is configured just on a basic level with my AUX=4 and BASE=2 for my stock 450cc injectors. Do I need to edit the MAF size in ECUflash from what it's originally at being 286g/s? Also do I need to edit the scaling or smoothing table at all?
 
That’s what I think. As long as the MAFT is set up to stock settings I think ECUflash will see it as a stock MAF size. Just wanted some confirmation.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top