The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Kiggly Racing
Please Support Morrison Fabrication

NEW! 2G front and rear subframe bushings + diff bushings

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

99gst_racer

Moderator
11,976
1,542
Apr 5, 2003
Coloma, Michigan
Volk Metal Craft is pleased to offer solid aluminum bushings for the 2G front k-member, rear subframe, and rear diff!


2G DSM products: https://volkmetalcraft.com/product-category/2g-dsm/



You must be logged in to view this image or video.



We have plenty of the front k-member bushing kits and rear diff bushing kits in stock. We only have one set of the rear subframe bushing sets in stock right now, but will have more in 3-4 weeks. These are the exact same bushings offered by Adam Porto (black_gst) many years ago. Adam has since retired from producing these and Volk Metal Craft has purchased the rights to produce and sell them.


And through the month of August, use coupon code DSMTUNERS on any website order and receive a free can koozie and decal. :thumb:

You must be logged in to view this image or video.





2G aluminum front K-member bushing set
$175.00

https://volkmetalcraft.com/product/2g-aluminum-front-k-member-bushing-set/

You must be logged in to view this image or video.




2G solid Rear Subframe bushing set
$170.00

https://volkmetalcraft.com/product/2g-solid-rear-subframe-bushings/

You must be logged in to view this image or video.




2G solid differential bushing set
$45.00

https://volkmetalcraft.com/product/2g-solid-differential-bushing-set/

You must be logged in to view this image or video.
 
Last edited:
Sweet, hopefully that front lower crossmember support that we spoke abt in 2016 is still on your to do list.:pray: @99gst_racer
It absolutely is! It's been a busy year for us so far, with the 7 new products we've introduced. I would have liked to already have been building the 2G front crossmember bars, but it's still at the top of the to-do list!

https://volkmetalcraft.com/works/
 
I saw these on the site the other day and was wondering how long they had been available. I also noticed that a 2g compression arm is in the works???
I've had the rear subframe bushings for a while, but the diff bushings and k-member bushings are new for me.

I'll be building two sets of compression arms and having them tested, but as long as everything goes smoothly, I'll start offering those sometime next year. I have a trick solution to run a mono-ball bearing on the inboard end and not have the flop issue.
 
I've had the rear subframe bushings for a while, but the diff bushings and k-member bushings are new for me.

I'll be building two sets of compression arms and having them tested, but as long as everything goes smoothly, I'll start offering those sometime next year. I have a trick solution to run a mono-ball bearing on the inboard end and not have the flop issue.

Take all of my money now.

Seriously though once we have those we've got handling potential we never could have dreamed of 5 years ago. Now all we need is a billet knuckle to allow a wider tire to tuck under the fender.
 
I wont to buy rear toe arms, but the web site douse not have a option to calculate shipping to Canada .
My website is currently set up to only process US orders. I can ship internationally, but it must be done manually and via e-mail contact. Very soon, RTM will be stock Volk Metal Craft products in Canada, and I will be referring all Canadian orders to them. They will be able to be far more competitive on pricing due to the costly expense of shipping into Canada for me. If you cannot wait a few weeks for them to get the ball rolling on their first order, please send me an e-mail and I'll get you taken care of. [email protected]

Glad to see you making these Paul. Really cool!
Thanks Kevin!
 
Last edited:
A great way to make your subframes great again!

You must be logged in to view this image or video.


You must be logged in to view this image or video.

You must be logged in to view this image or video.


You must be logged in to view this image or video.

You must be logged in to view this image or video.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top