2gmitsueclipse
DSM Wiseman
- 2,393
- 768
- Jul 13, 2005
-
Auburn Hills,
Michigan
Selling a few items I have been holding on to, but could be put to use by someone who could use them. Buyer covers PP fees. U.S. shipping only.
Valve cover and new FP intake (non-recirc.) Powdercoated wrinkle black and feature -10 an fittings for a catch-can setup. The setup has not been installed on a car since work was completed. OE baffles were removed to ensure no media was trapped. Setup will include new baffles that will need installed.
$125 shipped Intake only. Valve Cover is SOLD
2g DG setup: Includes ALL machined components, Koni sleeves (2.25") w/ low profile hats, Koni 2.5" spring adapters, torrington bearings w/races, and Koni struts (F + R). Items are disassembled and are unused. There is slight scratching on the Koni top hats (not the upper mount plates) from packaging. The only thing needed to complete the setup would be Hypercoil 2.25" springs of your choice and 2.25" helper springs. The Koni shocks will need the extra snap-ring groove. SOLD
Old-school Buschur Racing stainless UICP made for 2g. This a quality piece that will likely outlast your car. UICP is flanged (steel) for an HKS bypass valve, which will be included. The HKS bypass valve is currently set up for recirc., but will include the fitting for VTA. SOLD
Valve cover and new FP intake (non-recirc.) Powdercoated wrinkle black and feature -10 an fittings for a catch-can setup. The setup has not been installed on a car since work was completed. OE baffles were removed to ensure no media was trapped. Setup will include new baffles that will need installed.
$125 shipped Intake only. Valve Cover is SOLD
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
2g DG setup: Includes ALL machined components, Koni sleeves (2.25") w/ low profile hats, Koni 2.5" spring adapters, torrington bearings w/races, and Koni struts (F + R). Items are disassembled and are unused. There is slight scratching on the Koni top hats (not the upper mount plates) from packaging. The only thing needed to complete the setup would be Hypercoil 2.25" springs of your choice and 2.25" helper springs. The Koni shocks will need the extra snap-ring groove. SOLD
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
Old-school Buschur Racing stainless UICP made for 2g. This a quality piece that will likely outlast your car. UICP is flanged (steel) for an HKS bypass valve, which will be included. The HKS bypass valve is currently set up for recirc., but will include the fitting for VTA. SOLD
You must be logged in to view this image or video.
You must be logged in to view this image or video.
Last edited: