Or run low compression and have a "manageable" timing window.

I’m running Mahle 10.1 Pistons, Mahle run a lot tighter then other pistons, most ppl say the ptw is too tight have yet to see any issues with them though. Mahle is prob the biggest of the all the piston companies also as they make thousands of cars stock pistons.

For non believers Mahle are very strong pistons . This is mahle piston on Eagle rod after 50+ psi of boost pulls, all I had to change was the rods ( 300M this time ) the pistons where ok so I re used them & still are performing good @ 42 + psi street driven .