The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Fuel Injector Clinic
Please Support STM Tuned

Dsmdolneys 2g street car

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

A little idea to give you guys were we starting and how everything has been going. The car has been sitting in a barn for quite some time being untouched along with the interior was completely gutted minus the dash. So far what we have done is : Engine bay was stripped, sanded and re sealed, then painted. Subframe has been blasted and powdercoated then installed solid bushings. Wheel wells have been undercoated with por15. Every suspension part has been replaced, along with most the bolts. Complete interior has been installed also.
 

Attachments

  • F43FA188-F770-4770-9ACB-E1B6D5FE7968.jpeg
    F43FA188-F770-4770-9ACB-E1B6D5FE7968.jpeg
    71.4 KB · Views: 162
  • 68D0806B-D5EF-4468-B1EF-EC95E2631176.jpeg
    68D0806B-D5EF-4468-B1EF-EC95E2631176.jpeg
    241.7 KB · Views: 160
  • B2D201C9-1292-4C13-A077-609E822172DE.jpeg
    B2D201C9-1292-4C13-A077-609E822172DE.jpeg
    317.5 KB · Views: 186
  • C54176F8-CC2F-4C7E-B49C-B2C24AEFEDFD.jpeg
    C54176F8-CC2F-4C7E-B49C-B2C24AEFEDFD.jpeg
    277.5 KB · Views: 191
Last edited:
Some new parts showed up today which included a na 1g throttle body, jmfab small battery tray, and new valve cover with 8an fittings for the catch can. All installed now to just wait for the rest of the stuff to show up

7221CC84-83E2-44D3-A235-943459934834.jpeg
837DBC3D-109F-4B26-A30A-6D0AE8C413CF.jpeg
FDFF1DBB-4B62-4FAE-85A2-878DCF74C447.jpeg
4EB1A05A-3464-443A-81EC-82CE40498489.jpeg
 
Last edited:
Got some stuff checked off the list tonight. Got the fuel lines all routed and everything hooked up, installed and wired in the aem gauges, installed the jay racing alternator relocation, and a bunch more misc things that needed to be done.

71C40455-BE96-4853-A15B-68BBD0D18C82.jpeg
E722A3D1-F6D6-446C-A5DC-37E5E0B7DDCB.jpeg
 
Last edited:
Fenders, hood, front bumper all mounted up and still have to make a heat sheild for the side exit exhaust. Trying to make this thing ready for the cookout so we are trying to bust it out.

45A19D3A-3621-40F4-BDEA-D7FF64EA0FA5.jpeg
 
The car is a rollin. Few small things that need to be addressed then we will look into getting dyno time to see what this little 16g can put down. Also in the near future we plan on swapping coilovers in instead of the kyb / megan shock and spring setup we have in it now which sits way to low.
8A2A2CAE-B834-486D-AE77-99BAD608B137.jpeg

C5F2AEF4-063B-4E41-87C1-EF005643F5D0.jpeg

BE8D5630-9677-45B9-8419-FECA99CF7B1B.jpeg
 
Last edited:
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top