The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Fuel Injector Clinic
Please Support Fuel Injector Clinic

Street Build Project Final X

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

I have spent the last couple days working on the car. I installed all new ball joints, tie rods, control arms and I coated the wheel wells. As far as the engine bay I think I have everything in that needs to be installed before the engine. Power steering, ABS delete lines, brake booster and both master cylinders, A/C lines, I also made a bracket for the fuel lab filter and I did the battery relocation (thanks to GOFER for the great write up).

1C8UWuM.jpg

q9HNcAG.jpg

I6NFITG.jpg
 
Engine is now in! Took a couple hours to clean up the transmission, install new seals, install flywheel and clutch and then put it all in. The solid aluminum subframe mounts and poly engine mounts make it a little tougher to line everything up as there is no slack.

uZUKWyX.png


3gIc8A6.png
 
Had to battle the heat this weekend in the 90s but got a few things done. I also had some parts come in (walbro 450, rewire, transfer case seals and some other little odds and ends). I installed both axles and the rest of the suspension is in and torqued to spec.

6EVTZbC.png

VoPPpCx.png

KTpxhLV.png
 
I finally feel like I am making progress on the car:hellyeah: Still have a nightmare of wiring in the interior which I am looking to tackle this weekend. I ordered new seals for the transfer case and got that bolted in the car along with my Bulfab tubular cross member. I also installed the rear RM swaybar to match the front. Biggest news is that I bolted in the Archer Fab manifold and HX40 I cannot wait to drive this car.

pokPm2o.jpg

yJqXfNr.jpg

6OYi6Ay.jpg

mCYe29M.jpg

M5uN4RK.jpg

bpp64tn.jpg

qTZHJjD.jpg
 
Im back at it! Ive been super busy but now have time to finish this project. I cut out the spare tire section and installed a plate/trim. In the cabin I added a rewired 450 pump, apple carplay/backup camera and a carbon headliner. I am currently working on cutting the new carpet and installing the seats.

Most importantly I moved into a new garage so I have some space to actually work.

dsm5.jpg
dsm11.jpg
dsm13.jpg
dsm4.jpg
dsm7.jpg
dsm10.jpg
dsm12.jpg
dsm6.jpg
dsm3.jpg
dsm8.jpg
dsm9.jpg
 
Last edited:
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top