The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Rix Racing
Please Support ExtremePSI

For Sale 2g performance parts new and used

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Twistaye

15+ Year Contributor
425
6
Mar 22, 2007
Lawton, Oklahoma
Posting this to gauge interest mainly, if there's enough interest I'll start pulling parts as early as tomorrow.

UPDATED 16JUN18

2g AWD Shell with title (has some bad rocker rust, but still repairable, strut towers are solid) - $SOLD
FP black setup for external gate - $700
o2 housing with tial wastegate - $200
oil feed line - $15
272/272 cams (Kelford 272s) - $300
uncracked valve cover - $80
FIC 950cc injectors - $SOLD
2g AWD fuel sending unit with walbro 255 - $100
STM rail to tank line kit with Weldon fuel filter - $SOLD
AFPR with gauge, lines and fitting for rail - $SOLD
2g AWD transmission (shifts great through all gears from my limited time using it) - $SOLD
2g EPROM ecu with ECMLink V3 + cable (caps were redone via ECMTuning) - SOLD
BNIB OEM timing belt - $50
Stock timing cover - $30
A/C Condenser - $40
2g LSD rear axles - $SOLD
2g LSD rear Tcase - $SOLD
2g AWD front axles - $SOLD
2g stock wheels with almost new tires - $400
AEM wideband - $150
Autometer boost gauge BNIB - $30
VRSF Short route 2g FMIC (piping has 1g BOV flange / drilled for greddy flange with GM MAF installed in piping - MAFT not included) - $SOLD
1g BOV - $SOLD
2g headlights (could use some polishing but will clean up nice) - $100
2g rear lights + center section (excellent shape) - $100
2g grey interior pieces (LMK what you need) $TBD
Stock motor mounts - $40
Stock radiator with stock fans - $40
2g AWD 3" exhaust with DP, a'pexi n1 style - $SOLD
Stock alternator (works great) - $30
Stock PS pump (nipple at top is broken but works good) - $30
Stock 2g OFH - $30
White 2gA side skirts/door cap/skirt cap (with grey bottom, some pieces in better shape than others but all in decent shape) - $100

I would prefer local pickup for the bigger items but I'm not against shipping - but buyer will pay the shipping fees for these larger items. I won't pull parts until I know for sure I can sell the majority of everything. I'd rather just get the head rebuilt if that's what is needed to have a running car again before I rip it apart and don't sell everything.

Thank you for your time!
Twist
 
Last edited:
Here are some pictures as promised. Not the best ones yet since the parts are still on the car. I have a work function this morning and I'll be back home this afternoon to take better pictures of specific items. I have a lot of interest in some parts so i will keep y'all informed of what's going on. My plan is to dig into the engine hopefully tonight and I'll report as quickly as I can.

(Also I'm a Drill Sergeant at Ft Sill OK, if that helps explain my limited time / horrible schedule, LOL)

Some notes: Cams are definitely 272s, gatta figure out the brand specific
- AFPR is a fuel lab unit
- AEMCam Gears $100
- FP Recirc intake with tube $100
- Manual boost controller $20

-Jared
 

Attachments

  • IMG_20180602_083920.jpg
    IMG_20180602_083920.jpg
    251 KB · Views: 157
  • IMG_20180602_083912.jpg
    IMG_20180602_083912.jpg
    210.3 KB · Views: 164
  • IMG_20180602_083859.jpg
    IMG_20180602_083859.jpg
    231.9 KB · Views: 158
  • IMG_20180602_083856.jpg
    IMG_20180602_083856.jpg
    268.2 KB · Views: 161
  • IMG_20180602_083839.jpg
    IMG_20180602_083839.jpg
    311.6 KB · Views: 157
  • IMG_20180602_083836.jpg
    IMG_20180602_083836.jpg
    362.2 KB · Views: 163
  • IMG_20180602_083753.jpg
    IMG_20180602_083753.jpg
    470.2 KB · Views: 168
  • IMG_20180602_083727.jpg
    IMG_20180602_083727.jpg
    195.9 KB · Views: 163
  • IMG_20180602_083718.jpg
    IMG_20180602_083718.jpg
    343.2 KB · Views: 173
  • IMG_20180602_083657.jpg
    IMG_20180602_083657.jpg
    318.2 KB · Views: 157
  • IMG_20180602_083651.jpg
    IMG_20180602_083651.jpg
    341 KB · Views: 164
  • IMG_20180602_083646.jpg
    IMG_20180602_083646.jpg
    437.9 KB · Views: 161
  • IMG_20180602_083638.jpg
    IMG_20180602_083638.jpg
    380.5 KB · Views: 167
  • IMG_20180409_121722.jpg
    IMG_20180409_121722.jpg
    317 KB · Views: 177
Sorry for my sporadic timing! I wasn't able to dig into the engine this weekend but I pulled apart the timing covers and attempted to manually rotate the crank with a new timing belt and everything lined up and I definitely have some pretty bad resistance so I'm assuming something is bent or damaged.

I've decided that I will sell parts that people are interested in but I'm probably going to hold onto the shell for now. I'll be responding to PMs over the course of this week as time allows with specific pictures as requested.

If you PMed about an item before someone else then I'll ensure you get first dibs on that specific items. Give me some time during this week to pull the parts and I'll get to you as quickly as I can with detailed pictures and full disclosure as I'm not trying to have any issues selling these items.

Again - thanks for your interest and keep an eye on your inbox.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top