2g GSX 6bolt Spark Plug firing order

Dasean Real · Apr 6, 2018

Can anybody tell me how im supposed to wire my spark plug wires i have a 98 GSX with the 6 bolt swap and a black box stock 98 ECU I currently have them wired from coil 4,1,2,3 and the car wont stay on for more than like 5 seconds , i figured it was my CAS harness which i ordered another one but im not sure my wires are correct either any help would be appreciated

pauleyman · Apr 6, 2018

Not enough info here. car doesn't care what block you have. Are you running a 2gb cas, 2ga cas or 1g cas? Any of these are possible.

MindBlowin03 · Apr 7, 2018

If it's a 98 ECU then you have the correct order. A 95-96 ECU will require you to reverse the order.

Boomdeeze · Apr 7, 2018

@MindBlowin03 is correct, you have the correct plug order for the 98 ECU. Any check engine codes? I would verify the 6 bolt swap wiring is correct and then check to make sure your ECU isn't fried.

19Eclipse90 · Apr 7, 2018

@pauleyman is actually on point. Not enough information presented here. One would have to assume what CAS is being used to reach any conclusion.

See: Engine Harness Differences

Dasean Real · Apr 9, 2018

pauleyman said:
Not enough info here. car doesn't care what block you have. Are you running a 2gb cas, 2ga cas or 1g cas? Any of these are possible.

obviously the car doesnt care but i asssume its still relevant info im using a 1g CAS harness not sure what exact CAS it is but heres a picture

Boomdeeze said:
@MindBlowin03 is correct, you have the correct plug order for the 98 ECU. Any check engine codes? I would verify the 6 bolt swap wiring is correct and then check to make sure your ECU isn't fried.

im getting the P0340 P code

The Top DSM Community on the Web

2g GSX 6bolt Spark Plug firing order

Dasean Real

pauleyman

MindBlowin03

Boomdeeze

19Eclipse90

Dasean Real

Attachments

Similar threads

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds