The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Fuel Injector Clinic
Please Support Fuel Injector Clinic

no power to doors. HELP!

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

181161

10+ Year Contributor
107
37
Mar 19, 2011
El Paso, Texas
I have a 98 Spyder gst whose windows and electric doors do not work on either side. The switch has been tested and is working fine. I have tested all four of the window regulators manually and they are all working. I have checked the fuse and replaced the relay. My main issue is I have no power to the switches to lock or control the windows. need some help troubleshooting here.
 
sounds like you have some wire tracing to do. im assuming you had the door panels off and checked the wiring there? from there i would start tracing wherever they lead. could possibly be a bad connector in a harness plug somewhere as well. you can search for schematics on google or here as well. tons of info out there
 
When you hit the top down button to lower the convertible top, do the windows also lower?

I will try to post up the wiring diagrams a little later, if i have time
-----------------------
in the engine bay fuse/relay box,
-check fusible link 2 (yellow 60A)and 9 (green 40A)
-check fuse 11 (red 10A)

You must be logged in to view this image or video.

--------------------------------------------------
under dash fuse box,
check fuses 8,9.10,13
You must be logged in to view this image or video.


-------------------------

checks for windows and locks
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.


------------------------------------------
 
Dumb question but this might assist-do your door speakers work (both sides)? Reason I ask is because the electrical connector itself that connects the door to the car may have come unplugged/loose (or corrosion).
 
When you hit the top down button to lower the convertible top, do the windows also lower?

I will try to post up the wiring diagrams a little later, if i have time
-----------------------
in the engine bay fuse/relay box,
-check fusible link 2 (yellow 60A)and 9 (green 40A)
-check fuse 11 (red 10A)

You must be logged in to view this image or video.

--------------------------------------------------
under dash fuse box,
check fuses 8,9.10,13
You must be logged in to view this image or video.


-------------------------

checks for windows and locks
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.


------------------------------------------
Thanks this is some good info. ill get to work on it soon using most of this
 
Dumb question but this might assist-do your door speakers work (both sides)? Reason I ask is because the electrical connector itself that connects the door to the car may have come unplugged/loose (or corrosion).
don't have a stereo in the car right now so I honestly cant tell you.
 
Does everything else work? The ac fan, horn, headlights? I had something similar happen and it was the alternator components that were the issue.
AC was removed for alternator relocation, I haven't reconnected the horn after the quick release install but at the moment my headlights don't work. what do you mean the alternator components? as in the wiring and the fuse for it?
 
Hi does anyone know what the order in which the plug d-09 wires go. The old owner of my 94 Talon cut the plug and i bought new window motors. The pic y added is from the passenger side if anyone got a pic of the driver side i will be super grateful.
 

Attachments

  • 20180519_173915.jpg
    20180519_173915.jpg
    335 KB · Views: 66
Hi does anyone know what the order in which the plug d-09 wires go. The old owner of my 94 Talon cut the plug and i bought new window motors. The pic y added is from the passenger side if anyone got a pic of the driver side i will be super grateful.

Is this what your needing?

1g door main switch (drivers side)

PIN1 -- Black/blue
PIN2 -- ??Green?? (i cant read it on the diagram, so i think its green but it may not be)
PIN3 -- Black
PIN4 -- Red/blue
PIN5 -- Blue
PIN6 -- Red

You must be logged in to view this image or video.
 

Attachments

  • 1.png
    1.png
    19.3 KB · Views: 82
Is this what your needing?

1g door main switch (drivers side)

PIN1 -- Black/blue
PIN2 -- ??Green?? (i cant read it on the diagram, so i think its green but it may not be)
PIN3 -- Black
PIN4 -- Red/blue
PIN5 -- Blue
PIN6 -- Red

You must be logged in to view this image or video.

Yes this is what i need thanks
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top