The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support ExtremePSI

1G Custom 1ga splitter/lip

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Geeb

Proven Member
384
47
Apr 6, 2016
Philadelphia, Pennsylvania
What do you guys think? Its made out of ABS plastic, I'm going to reinforce it with fiberglass mat/resin for strength

It's not bolted up or anything yet, was just checking fitment. It's not exact, I couldn't hold it in place and take the pic at the same time.. But it will be all 100% even when it gets bolted up.

The bumper is so dirty, excuse that..

So anyway...?

You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
 
None, it's a modified "universal". So I guess you could say it's originally meant for a 1ga LOL

Thanks tho. I like the look of it. I'm surprised not more people do it.
 
Eb. If anyone's interested in buying one just inbox me and I'll make a few more
 
Last edited:
It's just flimsy you have to reinforce it with fiberglass or something and shape it a bit with some light trimming or sanding is all...

I'll show you my final product when Its done

If you look close, I can't really tell, but I think I have it upside-down if anyone grabs it for themselves keep that in mind I think it looks and works way better this way

And thank you lasthope for finding it again, it wasn't in my purchase history so even I couldn't get any more hah
 
Last edited by a moderator:

^^ Not all eBay specials are bad tho, with a little easy customising it could be a pretty sick lip for our cars



Thanks everyone for all your feedback.

It's going to be a while before it actually goes on the car since my entire front end is off (stripping and painting/shaving some of the engine bay) but I will finish it to just the bumper and show everyone

If anyone else decides to get one, post pics of What it looks like on the car please! I'm curious to see it like everyone else!

Thanks again guys. Tuners never lets me down!
 
Carbonetics actually just came out with a lip for the 1GA for $150.
It's good to see support for our 1G's! That said I'm not a big fan of fiberglass lips. I've had them on my Corvette and on one of my Evo's and in my experience, a lip on a low car will inevitably make contact with something, which will crack/break the fiberglass. I like the idea of polyurethane for a lip.
 
It's good to see support for our 1G's! That said I'm not a big fan of fiberglass lips. I've had them on my Corvette and on one of my Evo's and in my experience, a lip on a low car will inevitably make contact with something, which will crack/break the fiberglass. I like the idea of polyurethane for a lip.

Yeah this ones urethane. Just a little flimsy
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top