The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Fuel Injector Clinic
Please Support STM Tuned

2G 2g eclipse gst questions

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dillon7

Probationary Member
18
1
Jun 15, 2017
St Clair, Missouri
Hey I just bought my shell not too long ago and got the engine bay painted and bout to put the motor in out of my 97 gst in it just wondering what maintenance i should do on it before I put the Motor in? I was thinking timing belt(obviously), tensioner, idler pulleys, water pump, intake gasket, manifold gasket, And valve cover gasket. Any more suggestions would be helpful just wondering if I got it all or not.
 

Attachments

  • IMG_0298.JPG
    IMG_0298.JPG
    336.9 KB · Views: 88
If it were me, I'd replace every seal and gasket since the engine is already out. And since you're doing a timing belt and water pump anyway, might as well pull the head off, and check all the valve train parts, valve seals, and check the deck surfaces for flatness. Also replace the rear main seal and front crank seal. Replace bearings ect...
 
Is it auto or manual? If it's manual check out the clutch and flywheel apart from that spyderdrifter got about everything. I'm pretty sure you can find a complete rebuild kit with most seals and gaskets, GL!
 
Is it auto or manual? If it's manual check out the clutch and flywheel apart from that spyderdrifter got about everything. I'm pretty sure you can find a complete rebuild kit with most seals and gaskets, GL!
It's auto thanks for all the info I just bought all that stuff yesterday get it Friday. Motor should be ready to go In Saturday. I'll post some pics of progress
 
If it were me, I'd replace every seal and gasket since the engine is already out. And since you're doing a timing belt and water pump anyway, might as well pull the head off, and check all the valve train parts, valve seals, and check the deck surfaces for flatness. Also replace the rear main seal and front crank seal. Replace bearings ect...
That's the kind of logic that always got me in trouble (with my wife). Engine is out, may as well do some maintenance. Doing maintenance, may as well rebuild the bottom end, etc etc.
If it were me, and hindsight being 20/20, I'd do a timing belt/water pump, manifold gaskets, arp head studs, and front/rear main seals.
 
That's the kind of logic that always got me in trouble (with my wife). Engine is out, may as well do some maintenance. Doing maintenance, may as well rebuild the bottom end, etc etc.
If it were me, and hindsight being 20/20, I'd do a timing belt/water pump, manifold gaskets, arp head studs, and front/rear main seals.
Thanks for the info will definitely be noted I've heard a few say arp head studs especially when I get it together and wanna throw a lil more boost to it.
 
That's the kind of logic that always got me in trouble (with my wife). Engine is out, may as well do some maintenance. Doing maintenance, may as well rebuild the bottom end, etc etc.
If it were me, and hindsight being 20/20, I'd do a timing belt/water pump, manifold gaskets, arp head studs, and front/rear main seals.

I feel you there, luckily, my wife usually doesn't have too much of an issue with me getting new parts for "maintenance" and upkeep ;) She's actually pretty understanding of getting all new parts.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top