The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support RTM Racing
Please Support ExtremePSI

2G Are Prothane auto trans bushings same as manual?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Type1DSMr

Proven Member
1,114
149
Jul 27, 2014
Jasper, Indiana
Need some clarification on 2g Prothane bushings. I found some older information that says the bushing are the same, just not the the roll stop inserts. Is this correct? The Prothane part numbers are 13-501-bl and 13-503-bl. I'm looking at replacing the mounts with Prothane bushings with an OEM rear mount and a Boosted Fabrication front bar.
 
Need some clarification on 2g Prothane bushings. I found some older information that says the bushing are the same, just not the the roll stop inserts. Is this correct? The Prothane part numbers are 13-501-bl and 13-503-bl. I'm looking at replacing the mounts with Prothane bushings with an OEM rear mount and a Boosted Fabrication front bar.

Did you end up trying this?
 
I bought a manual kit and everything fitted just fine, roll stop inserts aswel
 
I bought a manual kit and everything fitted just fine, roll stop inserts aswel

Very nice. I just bought the mounts as I didn't need the roll stops. I'm using a front bar with a poly mount built in and Adams custom rear roll stop poly mount.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top