ishnish
10+ Year Contributor
- 940
- 152
- Jun 26, 2011
-
Modesto,
California
When running an evo 3 intake manifold, I know it's possible to run the stock 2g coil pack with it, but is it okay to run stock evo 3 spark plug wires on a stock 2g coil pack?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
It is just the spark plug wires for evo have 90 degrees angle for the coil side.
That's a good idea, too.I just used 2G Magnecore wires then bought MSD 90° ends to replace my 20+ year old OEM Evo 3 wires.
I just used 2G Magnecore wires then bought MSD 90° ends to replace my 20+ year old OEM Evo 3 wires.
Right on man thank you for the picture as well!At the time I did not have a picture of the stock NGK 2G plug wires used with the Evo 3 intake & coil bracket, so I took one. I think they fit pretty darn well.You must be logged in to view this image or video.
They are just spark plug wires good lord . Common sense. This is one of the dumbest posts ive seen on tuners. Not hatin, just bein real.
Glad you found my picture heplful. If you need I can take the cover off the plug valley so you can see how they fit under it.
They are just spark plug wires good lord . Common sense. This is one of the dumbest posts ive seen on tuners. Not hatin, just bein real.