codydsm1
10+ Year Contributor
- 53
- 6
- Oct 15, 2011
-
Loveland,
Colorado
A few months back i heard about ECUFlash and you could use it along with EvoScan to tune and log with help from the Tactrix cable/flash plug. I have recently downloaded ECUFlash, paid the 25.00 bucks for EvoScan got the 2.0 cable and flash plug, Donated 5 bucks to ceddy and got Rom 20550011.
Now a few things I'm still not clear on. I've been watching videos and reading threads like crazy but still cant find much on it. When ceddymod is downloaded is there anything else that needs "patched" into ROM before you can use it? I keep seeing videos about the 1byte load. From my understanding it started with 1byte, then went to 2byte and now its to 1byte load, correct?
Now the videos I've seen I see people copying and pasting code into their ROM to go from 1byte to 2byte and then changing an equation in EvoScan I believe or maybe ceddy ROM to something like 1.2*255? Is this something that still needs to be done or has this been updated in newer versions?
Another thing, the MUT table, will the hex values need to change to accommodate the change in code. If it does need done, where would I find those hex values? I find a ton for Evo ROMs. By adding the code it lets you pass the 160 load limit? Is this just for ECU limit or is this the reason my fuel maps and timing maps top out at 160? Or would just getting the big maps take care of that issue?
Thanks in advanced as any info here will help
Now a few things I'm still not clear on. I've been watching videos and reading threads like crazy but still cant find much on it. When ceddymod is downloaded is there anything else that needs "patched" into ROM before you can use it? I keep seeing videos about the 1byte load. From my understanding it started with 1byte, then went to 2byte and now its to 1byte load, correct?
Now the videos I've seen I see people copying and pasting code into their ROM to go from 1byte to 2byte and then changing an equation in EvoScan I believe or maybe ceddy ROM to something like 1.2*255? Is this something that still needs to be done or has this been updated in newer versions?
Another thing, the MUT table, will the hex values need to change to accommodate the change in code. If it does need done, where would I find those hex values? I find a ton for Evo ROMs. By adding the code it lets you pass the 160 load limit? Is this just for ECU limit or is this the reason my fuel maps and timing maps top out at 160? Or would just getting the big maps take care of that issue?
Thanks in advanced as any info here will help