The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Fuel Injector Clinic
Please Support STM Tuned

ECMlink ECU can't find MAP sensor?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

828DSMs

Proven Member
42
10
Jan 24, 2014
Conover, North_Carolina
Like the title states, I just installed ECMLink v3 with an Omni 4 bar MAP and GM IAT sensor. I bought the ECMLink plug and play harness but when I do a capture it always says it cannot find the MAP sensor.
 

Attachments

  • 20170512_164613.jpg
    20170512_164613.jpg
    673.3 KB · Views: 125
Last edited by a moderator:
Did you set it all up in the ECU inputs tab? Post a log so we can see your settings will help figure it out.

You don't have the PC side assigned. In the chart at the top, Pin Assignments for Data logging, set the pins to the appropriate sensor.
 
Last edited by a moderator:
Did you set it all up in the ECU inputs tab?

You don't have the PC side assigned. In the chart at the top, Pin Assignments for Data logging, set the pins to the appropriate sensor.

This. ^^^^^^
You forgot to assign the sensors to the ecu input. Is this on a 1g or 2g?

If it's the one in your avatar then u would have to select the mdp or baro ecu input pin and select the appropriate sensor.

You must be logged in to view this image or video.
 
Last edited by a moderator:
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top