The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support ExtremePSI

2g Dash Swap

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Eclipse 1998

10+ Year Contributor
240
32
Jul 21, 2010
,, Indiana
Hello all, I'm in the process of swapping a dash from a auto 99' gs into a manual 97' TSI. So I just pulled the dash out of the 99' and I'm wondering if the harness attached to it from the pictures are universal throughout models? Or do I have to swap it with the 97' harness? Thanks.
 

Attachments

  • IMG_2909.JPG
    IMG_2909.JPG
    379.8 KB · Views: 101
  • IMG_2910.JPG
    IMG_2910.JPG
    388.2 KB · Views: 109
I would personally swap the harness for the gauges, but I have read somewhere on here that the turbo harness will work with the non-turbo cluster. That's the only difference between the harnesses. Don't forget to swap the VIN plate.
 
Yeah I'm still trying to figure how I'm gonna do the Vin's ?? But I'm trying to get a 100% answer on the harnesses if I can leave it in there?
 
Well, what I've always done fro the VIN plate is drill out the rivets, and insert new ones. Pop rivets from your local hardware store are perfect. Even if you do have to swap the harnesses, it's only a few screws, and nothing hard to get around.
 
Update:

This time around i labeled all the bags and bolts with respect to the trim and locations. Additionally i labeled the connectors and wires with blue painters tape, figure it would be easier navigating when i put it back together.

Got the talon dash out today, almost stopped bc it was getting dark out but felt the need to finish. Im taking a lot more pictures now. I also found some wiring i want to clean up, mainly the triple gauge pillar gauges and a little under the steering wheel like the turbo timer. Any how tomorrow ill be swapping the harnesses from the dashes. In my case i actually have to swap the dash harness being as the talon has the infinity tweeters and the eclipse does not the harnesses differ and a few other points i noticed different connectors . You'll see what I mean from the pics.
 

Attachments

  • IMG_2914.JPG
    IMG_2914.JPG
    273.5 KB · Views: 115
  • IMG_2915.JPG
    IMG_2915.JPG
    273.3 KB · Views: 125
  • IMG_2916.JPG
    IMG_2916.JPG
    306.5 KB · Views: 138
  • IMG_2917.JPG
    IMG_2917.JPG
    307.8 KB · Views: 125
  • IMG_2918.JPG
    IMG_2918.JPG
    328.4 KB · Views: 176
  • IMG_2919.JPG
    IMG_2919.JPG
    199.4 KB · Views: 139
  • IMG_2920.JPG
    IMG_2920.JPG
    172.8 KB · Views: 118
  • IMG_2921.JPG
    IMG_2921.JPG
    237.7 KB · Views: 92
  • IMG_2922.JPG
    IMG_2922.JPG
    222.1 KB · Views: 135
  • IMG_2923.JPG
    IMG_2923.JPG
    208.6 KB · Views: 118
  • IMG_2924.JPG
    IMG_2924.JPG
    262 KB · Views: 118
  • IMG_2925.JPG
    IMG_2925.JPG
    264 KB · Views: 119
  • IMG_2926.JPG
    IMG_2926.JPG
    202.7 KB · Views: 138
  • IMG_2927.JPG
    IMG_2927.JPG
    260.9 KB · Views: 127
Small update:

Got the harnesses swapped over, now to just swap the Vin plates and i can start putting the dashes back in.
 

Attachments

  • IMG_2935.JPG
    IMG_2935.JPG
    278 KB · Views: 68
  • IMG_2936.JPG
    IMG_2936.JPG
    300.7 KB · Views: 61
  • IMG_2937.JPG
    IMG_2937.JPG
    285.8 KB · Views: 57
  • IMG_2938.JPG
    IMG_2938.JPG
    295.9 KB · Views: 52
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top