The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Kiggly Racing
Please Support Fuel Injector Clinic

2G Vacuum Caps

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

PrimerPLus

10+ Year Contributor
1,158
20
Jul 28, 2011
Tokyo, Asia
Anyone know where I can get a set of high temperature vacuum caps? (probably needs to be silicone?)
I have had to replace my current vacuum caps a few times because they just crack. They are from Schucks, and I think it's because they are the rubber ones.

If anyone knows a good kit that comes with assorted sizes or if anyone knows the sized that are required to cap all the ports on the throttle body and the Intake Manifold / Valve cover PCV ports.
 
Why not remove the unwanted nipples (heat is your friend), tap the holes and plug them with some set screws? No need for cheap caps ever again.
 
Last edited:
I,haven't ill,check them out thank you cbyamd.
Do you mean like napa?

I like to keep it so if I have to convert it back it won't be a pain. Otherwise yah I'd do that biglady112
 
I do like I did. Weld them shut.

If you tap the holes and install set screws make sure to use cement to seal them and to make sure the never come out.
 
Last edited:
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top