ilikejesus said:

that will definitely give you all the fuel you would need thats for sure!

Click to expand...

yea she's gonna be thirsty!!!!

Nice build!

I am sure you have checked, but just in case make sure you check/tighten those cam gear adjustment bolts.

952g63t said:

Nice build!

I am sure you have checked, but just in case make sure you check/tighten those cam gear adjustment bolts.

Click to expand...

yea there all coming out and red lock tight is going on, im even gonna see if i can find arp bolts for them. there super duper tiny!

WELLL MY PUMP SHOWED UP TODAY!!! TIME TO FUEL THIS BEAST!

Meh, the whole setup just looks cheaply done and just filled with turd parts. Haha, jk the engine looks badass . Don't get happy now, you still gotta a lot of work to do. What was the turbo you were going with?

Ahahaha. Turd parts. Good one. Great build man.

Vegas smith said:

Meh, the whole setup just looks cheaply done and just filled with turd parts. Haha, jk the engine looks badass . Don't get happy now, you still gotta a lot of work to do. What was the turbo you were going with?

Click to expand...

i found a t4 hot side for my turbo, i posted the wrong specs before, the specs i posted was for a much larger turbo then what i had, my current specs are ... with a t4 housing! and yes the journey is close but i still hae a ways togo!

Compressor Specs:

- 63.5mm compressor wheel inducer 66lbs/min

- 5" Hose inlet 4.21 V Band Outlet Compressor Cover

Turbine Specs:

- 74.3mm turbine wheel exducer

- 1.10 A/R Twin Scroll T6 Turbine Housing 5.75 Marmon Outlet

boostdawd said:

Ahahaha. Turd parts. Good one. Great build man.

Click to expand...

Haha, wasn't the most creative post I've ever made.

Vegas smith said:

Haha, wasn't the most creative post I've ever made.

Click to expand...

sometime a nice good turd is painful, hopefully this turd will be a quick one

pick up my 10 gallon fuel cell today, and also got 15 feet of -10an fuel line, im gonna use the push on fittings with lock clamp. thhe hose is 1000psi burst pressure, the minimum on the pump

Any updates? Love the build and progress man.

boostdawd said:

Any updates? Love the build and progress man.

Click to expand...

been really busy with work, but im gonna have some free time this weekend to finish up the fuel cell

well i finally did it guys!!! got that dam fuel cell in, i made a frame and also made the straps my self, check it out, and yea one more thing i put the motor in!!!!

i just gotta paint it and the frame for the cell is all done


fuel cell



engine

Probably a dumb question... What is that in the picture between the headlight and motor mount on driver side?

petegsx said:

Probably a dumb question... What is that in the picture between the headlight and motor mount on driver side?

Click to expand...

its my mechanical fuel pump, i put it down to take the pic, i didnt even realize it was there , go back to top of page you will see me holding it

Cool, I thought it said aeromotive on it. Nice car, keep up the good work!

petegsx said:

Cool, I thought it said aeromotive on it. Nice car, keep up the good work!

Click to expand...

hey thanks man!!!

hey all!!!!! ive put the dsm on hold for a little but im back at it!!!! im paying off an aem v2 ecu for the car right now, cant wait =)!! im also looking at a divided t4 manifold as well for the build!!! i think im just gonna get him up and running for now with a 500-600hp tune... then work on drive shaft... welding diffs... transfer case... ect... let me know what you want me to do and what you wanna see... please all question and options welcome!!!! i do need them!!!

got this goodie the other day for my build!!!! aem v2!!!

and i have a kiggly hla on the way should be here tomorrow

@95_gsx_2g thanks for helping me out get the ecu!!!!

mountainbike91 said:

@95_gsx_2g thanks for helping me out get the ecu!!!!

Click to expand...

No problem brother I'm glad I could be of help!

welp its been a while!! so heres the scoop! im gathering oem bolt on parts just to get it started! hopfully this weekend or the following week it will run! this is only to cycle the motor. then i will be getting the parts i need to make her fast!

i sold the aem v2 the other day. i want to have the car be street-able. so i ordered a ecmlink v3 full from a current member on here.

its been a long road and its time to start paving that road so i have do racecar stuff on it

items ordered this week to get running

1g stock intake manifold
1g stock exhaust manifold
ebay fuel pressure regulator
stock 450cc injectors
ecmlink v3
gm style speed denisty kit
rear oem 3 piece tail lights

need to run---- if you have used and cheap please let me know!!!! items must work
inline cheap fuel pump
tps
iacv

thats all i think i have left to get but once i start putting these parts on ill make an updated WTB list

SHOW SUPPORT! THE FLASH IS GOING TO LIVE!!!!!!

You've got my support! This is an awesome build, nice to see you're back at it! Beautiful car, can't wait to see what it looks like when it's done!

Helaman-99 said:

You've got my support! This is an awesome build, nice to see you're back at it! Beautiful car, can't wait to see what it looks like when it's done!

Click to expand...

i cant wait either to see it done! hopefully this summer it will finally be done!!!