Nate355RS
Proven Member
- 446
- 50
- Oct 25, 2012
-
Salem,
Virginia
This weekend I tried to pull the oil pan to inspect the bottom end and ran into problems. Using the VFAQ, I pulled all 5 bolts holding the t-case to the transmission and tried pulling the t-case. I tried wiggling it from side to side and prying it off and nothing worked.
I finally grabbed it with both hands and gave it a good tug. The transfer case started moving, but unfortunately the transmission output shaft moved with it and ATF started going everywhere. Not really sure what to do because the shaft is stuck and there's not enough room between the oil pan and t-case to pull it out of the transmission. Any idea where I go from here?
I finally grabbed it with both hands and gave it a good tug. The transfer case started moving, but unfortunately the transmission output shaft moved with it and ATF started going everywhere. Not really sure what to do because the shaft is stuck and there's not enough room between the oil pan and t-case to pull it out of the transmission. Any idea where I go from here?