The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support Fuel Injector Clinic

Going to be searching for a dsm in WA

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

orangutan

Probationary Member
26
1
Nov 13, 2014
Kennewick, Washington
I need a low mileage DSM, I don't care if it's a non-turbo or a turbo fwd, or a turbo AWD. Less than 120k miles please. This will be my third DSM, first one with a decent working budget. Car must be running state, I am disabled and do not have tools anymore.
 
Last edited:
Thanks, I am just skeptical because I actually did that to the car in my display picture before I blew the engine in it, LOL. It never went down the road straight again and I still do not know how to correct the steering wheel angle. If I was more nuanced with alignment problems I would probably take it up because its pretty quality of a build. Bit of a bummer really, because I wanted an automatic more.
 
So are you in the Tricities area?
Yes, I am. I've decided to lower my price range, I've decided I can enjoy a non-turbo's power enough with the type of driving I have at hand. There's one in Seattle, a 1g with 73k miles I want to pick up. But I'm going to have to probably come up with a beater to get myself to it, in the mean time. There's an ESI with 240k that seems like it's not dead yet for a grand I'm probably going to get myself over there with. It's sad when you can get a car to own and register that runs for only another 500 dollars and it has a pair of XXRs on it. https://kpr.craigslist.org/cto/5985920482.html I've yet to go look it over in person, but I called and he said the timing cover being cracked and rattling is the only thing wrong with it. I had that happen to my 2g RS eclipse from driving it hard so I imagine I'm not getting myself in to anything too heinous. I'm gonna slow the viewing of the car way down when I get a look at it, and check all the fluids and make sure it's going to hold up. Take it for a ride up in the hills and make sure it's not gonna overheat.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top