The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support STM Tuned

Door harness Help

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

xterminat0r

5+ Year Contributor
32
7
Feb 4, 2016
Inver Grove Heights, Minnesota
I got a junk yard door and it's off a convertible. The car I own is not a convertible. They are both power windows and locks. My harness is smaller so it has half the wires. My harness has one green/yellow wire and the convertible door does not. What wire do I splice into?
You must be logged in to view this image or video.
You must be logged in to view this image or video.
 
are you using the spyder window switch and door panel?
 
the (green/yellow) goes to PIN30 (blue/yellow) on the spyder harness main plug

on the spyder harness main plug you won't be using:
PIN8 red
PIN9 (red/black)
PIN 20 (red/white)
PIN 21 (red/blue)
PIN 22 (black/white)
 
The wiring I had was correct the motor in the driver junkyard door is dead. Took me a few hours to figure that out.
the (green/yellow) goes to PIN30 (blue/yellow) on the spyder harness main plug

on the spyder harness main plug you won't be using:
PIN8 red
PIN9 (red/black)
PIN 20 (red/white)
PIN 21 (red/blue)
PIN 22 (black/white)
 
The wires I listed are the ones for the operation of the rear windows. Since your rearr window dont roll down, there isnt a wire on your existing harness to splice them into
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top