The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support STM Tuned

Maf translator 1G version 1.3 and 2.02 chip

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Justinmyy

Probationary Member
1
0
Jun 19, 2016
Maine, Maine
I feel dumb for asking this but i bought a maf traslator for 1G and the version is 1.3.

I have 2g gsx and I changed the chip to version 2.02 which is for 2G´s.

So how I tune the box now and does the 2.02 chip work with 1G maft translator in a 2G?

I read somewhere that the dip switches are somehow changed now with the version 2.02 is this correct?
 
Are you sure on the version? They stopped making 1.3 a long time ago. Look on the board, in the bottom right hand corner it should say the Board Version, this is not the software version number if the board version is 1.7 then the MAFT will work for your 2g for sure, I think it will still work if it really is 1.3 though, there is just different instructions and of course you have the wrong connector for a 2g maf

Here are the instructions,
1.3
http://fullthrottletech.com/showthread.php?t=642

ALL Versions
http://fullthrottletech.com/forumdisplay.php?f=40
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top