The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support Morrison Fabrication

420A Power window install?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Slick-_-Rick497

Probationary Member
19
0
Nov 15, 2015
Gainesville, Georgia
i have a 99 rs that is like to put power windows in, I know a lot of universal kits come with power locks to but I don't really care about those. I'm just wondering how I hook them up to switch power after there installed?
 
Instructions should come with the kit, but if not then use a test light and poke around in the fuse box. Chances are you will find an unused fuse whose power is switched with the key, or at least a power wire that would work. Won't recommend piggybacking off another circuit though.
 
Don't get a universal kit. All you need is the power window 'stuff' out of a GS, GST or GSX along with the switches, door panel and door wiring harness. Under the dash you just has to plug in the relay and you are set. It's super simple. I believe 2gnt.com has a wiki write up.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top