The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Register Log in
Please Support STM Tuned
Please Support STM Tuned

Injen Intake Couplers???

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Sp00lin16g

Sp00lin16g

Proven Member
51
0
Jun 29, 2015
Cleveland, Ohio
Does anyone have or know where I can get couplers that will fit the injen intake .. my current couplers are hard and may be causing a boost leak??

Thanks guys
 
Sort by date Sort by votes
That seems strange. My Injen intake couplers are all before the turbo & would make any difference for a boost leak. Could mess with MAF metered air though & cause running lean maybe. Anyway couplers can be bought from just about any one of your favorite vendors & there many really goods vendors on here & support our community that you can go to & support. The big one is 4in & the small is 2-1/2.
 
Upvote0
Mello said:
That seems strange. My Injen intake couplers are all before the turbo & would make any difference for a boost leak. Could mess with MAF metered air though & cause running lean maybe. Anyway couplers can be bought from just about any one of your favorite vendors & there many really goods vendors on here & support our community that you can go to & support. The big one is 4in & the small is 2-1/2.
Click to expand...
ok thanks for the info .. the larger coupler is an oval, will that work?
 
Upvote0
Mello said:
That seems strange. My Injen intake couplers are all before the turbo & would make any difference for a boost leak. Could mess with MAF metered air though & cause running lean maybe. Anyway couplers can be bought from just about any one of your favorite vendors & there many really goods vendors on here & support our community that you can go to & support. The big one is 4in & the small is 2-1/2.
Click to expand...
The 16g intake inlet is 2.5in?
 
Upvote0
Well I think so. Mines on my car so I can't measure. it may be 2-1/4. You should measure your old one to make sure.

Edit: It's 2-1/4. I went & measured my Boost Leak Tester coupler. It's the same size because that where I weak test at.
 
Last edited:
Upvote0
Just picked up a 2 inch couper and t clamps on ebay for 5 bucks. Guess I'll have to give it some love to get in on. Lol
 
Upvote0
Very nice ... I'll measure and see what I'll have to order. Do you just get one off ebay or a aftermarket site like the approved vendors?
 
Upvote0
If i remember correctly its just a round coupler thats then oval, memory is telling me its a 100mm dia but its been a few years since i actually did this check so sorry if im way off
 
Upvote0
Siliconeintakes dot com will have anything you ever need... before speed density i got a 45 degree hose for bov return too...

Not trying to steer you anywhere just have had great experiences with them
 
Upvote0
enriquez2000 said:
Siliconeintakes dot com will have anything you ever need... before speed density i got a 45 degree hose for bov return too...

Not trying to steer you anywhere just have had great experiences with them
Click to expand...
Good call on the siliconeintake ... they're sold out of the 2.25 in tbolt clamps ahah and I needed one
 
Upvote0
Personally I think T-bolts before the compressor would just be a waste of money.
 
Upvote0
Pegasus Racing is another company I've had good experience with regarding silicone tubing. My BOV mounts in a rather unusual place thanks to the FMIC so I had to get creative with tubing/routing. Found what I needed from them. Also needed a longer straight section to clear the P/S cooler. My only complaint-only black, red, or blue colors. Lol. (I like pretty colors!)
 
Upvote0
You can use a spritz of hairspray on those couplers, helps them slide on and is a light adhesive to really help them stay put. A hair dryer too, but I always get a awkward/annoyed look from the hairdryers owner when I'm using it for something like that .
 
Upvote0
You must log in or register to reply here.

Similar threads

warren
  • Question
2G Injen intake
Replies
6
Views
780
chrysler kid
chrysler kid
appleyard777
  • Question
injen intake
Replies
5
Views
490
my98GST
  • Question
injen intake???????
Replies
6
Views
532
infamous1
  • Locked
  • Question
Injen intake.......
Replies
5
Views
513
miteclgst
  • Question
injen intake
Replies
2
Views
429
Defiant
Defiant
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top