The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support STM Tuned

1G Part# request

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

SrKegler

15+ Year Contributor
1,123
35
Feb 29, 2004
Daytona Beach, Florida
Putting the transmission back on the engine and saw the dowel spacers are missing. Are they necessary? If so, can I please get a part # for them. Hopefully the Chrysler dealer will have them.
 
Yes they are a definite must, as well as the starter plate between the trans and block. Give me a minute and i'll edit w/ part numbers.

I concur with the MD020260 per ASA
 
Thanks a bunch. Had the clutch replaced a few years back, guess they left them out. Why I was wondering if they were needed. Fingers crossed Chrysler has them. No Mitsu deal;er in my area.
 
Where are you guys getting these part numbers ?
 
If its not from experience, or memories of past hardships LOL
JNZ tuning is usually pretty good with providing part numbers when you look up what you're looking for.
 
...or they've downloaded Mitsubishi CAPS or ASA? :idontknow:

Last I checked, the links here still worked. Note that CAPS -- in my experience -- doesn't tend to work with Windows 7 or newer. ASA is the newer version though I'm not sure when it stops being compatible with Windows. Anyway... Part Number Questions

I will also add that in downloading ASA, the instructions must be followed to a T.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top