The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support STM Tuned

Look at me! Look at me! (engine bay porn)

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Lot of good looking cars here.

Here is my addition
You must be logged in to view this image or video.
 

Attachments

  • 10887101_826782230716640_5759189231541372852_o.jpg
    10887101_826782230716640_5759189231541372852_o.jpg
    124.3 KB · Views: 201
I'll jump...

My current Galant VR4:
You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.








My last Galant VR4:
You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.
that white ones engine bay is minty
 
Heres what I did to a friends 97 spyder last summer

This was my first time doing this much body work, engine building and overall attempting somthing of this scale. I think it turned out well for what we had to work with.

You must be logged in to view this image or video.



You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


Wiseco 9:1 pistons for the 4g64, eagle rods, arps, mls, machined and balenced block, 1mm os ss valves, bc titanium springs/retainers
You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


Stock turbo for now, but built and ready engine. The cars been running 3000 miles now and will get upgrades this summer.
 
The bay is so cramped I am struggling just to find a home for my 2 inch AFPRegulator.[/QUOTE said:
I finally found a home for mine... attached it to the clamp around the brake fluid reservoir. Just put a new longer bolt in w washers and a lock nut then BAM! Lol regulator installed!
 
That is just too clean darknezz ..just a simple grease stain somewhere.

Brett.....I bought a power washer just to clean the engine bay once I'm done.....Summit White FTL
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top