The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support STM Tuned

Aem question; can I reassign my map sensor to a different pin

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

superorange

10+ Year Contributor
188
0
Sep 11, 2008
hollywood, Florida
I have series 1 aem on my 1g. I'm wondering if I can/ how to use a different input for my map sensor than the one aem says to use ? Thank you in advance!
 
Technically I think you could with the extra pin outs and ins it has, but you'd have to trial and error it or do some research.
 
I think you can too. Go into your all options list in the EMS software and look for an option called something like "MAP Analog in". When you go to try and change it you should get a drop down list box that will show all of the choices. Cross reference your choices to the v1's pinout for your 1g & find one that is not bein g used. I think any input that is in to dropdown box option's should be a 0-5v input for the EMS & like the MAP. This is from memory as I don't have my laptop with me right now. Good luck; you'll have to play with it. BTW-why?
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top