The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support STM Tuned

Size of FP manifold race hardware?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Maxthepersonz

Supporting VIP
350
62
Feb 3, 2014
Madison, Wisconsin
Ffwd makes some nice bolts for the turbo. I bought the arp set and they were only in for like a year and I used high temp anti seize on install and I still needed to heat them and be real careful taking them out as they were stuck. I have a evo 3 16g and the turbine housing is made of a different alloy with higher nickel content, which seems to cause problems for others too. But it seems the ffwd bolts don't have that same issue from what I've read.
 
The rears are the OEM 1g/2g manifold to turbo bolts, and the fronts are Evo VIII/IX mani to turbo bolts, with two OEM turbo manifold conical washers between the bolts and the manifold. I just can't remember which way the washers are supposed to be facing, sorry.

edit: I just saw where you said that in your original post, if you go on STM's site, they have them listed in the OEM parts section for the respective model.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top