beansblacktsi
15+ Year Contributor
- 283
- 53
- Apr 2, 2007
-
Lincoln,
Nebraska
Well finally finished up the new motor and made it to our local heart breaker mustang dyno! New motor setup is just 10.5:1 Wseco pistons with Manley Turbo tuff rods, good valve springs and delta 272s. This was all done on a 7blade 60mm hx40 with the t4 twinscroll. Car ended up making 547hp at 40psi with 14 degrees of peak timing. From 13 degrees to 14 degrees we picked up 20hp! Added another degree and that is when the control twisted and popped out of the rear mount! I'm very happy with the new numbers and cant wait to get it to the track this season!
Around the 3min mark is when it starts getting real crazy on the dyno and watch till the end when the control arm pops out!
Around the 3min mark is when it starts getting real crazy on the dyno and watch till the end when the control arm pops out!
You must be logged in to view this image or video.
Last edited: