The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Rix Racing
Please Support Rix Racing

What greddy bov is this and can it be recirculated?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

darknezz7

Proven Member
571
80
Mar 30, 2014
Eugene, Oregon
So this came with our parts car. I can't seem to find a picture of one quite like this, seems like its an RS but all the others have holes on the output, for that whistle sound I suppose.

You must be logged in to view this image or video.


You must be logged in to view this image or video.


I'd like to know what kind of bov this is and if I can take off the output and put on something that I can recirculate.

thanks
 
Check if its real. Google knockoff greddy bov and compare the pictures.

The end does look weird. I picked up a recirculate adapter for my real greddy. The end that should have holes unscrews and a hose end type fitting with a rubber gasket screws in. I got the adapter from rtmracing.
 
I compared it earlier on greddys website and everything that I can see checks it out to be authentic. I also tried to take off the end but only by hand, wanted to check that it actually comes off before I took pliers to it (Ill still protect it ofc)

So I just need to get that off and measure the hole, all threads should be the same?

I def want to recirc it. Obviously the po of the parts car did not know WTF he was doing, oh wait he said it had bent valves when it was blown head gasket.


Looks like this is what I need
http://www.ebay.com/itm/GReddy-Blow...Parts_Accessories&hash=item2c86afdc65&vxp=mtr
 
Last edited:
I compared it earlier on greddys website and everything that I can see checks it out to be authentic. I also tried to take off the end but only by hand, wanted to check that it actually comes off before I took pliers to it (Ill still protect it ofc)

So I just need to get that off and measure the hole, all threads should be the same?

I def want to recirc it. Obviously the po of the parts car did not know WTF he was doing, oh wait he said it had bent valves when it was blown head gasket.


Looks like this is what I need
http://www.ebay.com/itm/GReddy-Blow...Parts_Accessories&hash=item2c86afdc65&vxp=mtr
I took the horn off of my TurboXS RFL. It was a pain in the ass. Until I decided drill 2 holes in it to stick a screwdriver through it. Even then was tough. I ended up using a heat gun on it. And the second it cracked lose, The sweet smell of locktite
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top