I have a built 6 bolt swap just recently out if the shop. It will start and idle fine but as soon as you touch the gas with the clutch in(it will climb rpms to about 3k unless you pump it). After you let of the gas it will Rev up, if you don't have the clutch in idling it will Rev fine. Could I just be running to rich on the tune?

List of mods:
Speed density convertion
Small 16g
650cc injectors
Wally 255lph pump
Afpr
DSM link v3

I would say lean if its a fuel problem think when you let off the gas it closes the throttle plate which lets less air in. but I dnt think this is your problem. can you post a log

Sadly my pc isn't working to log anything[DOUBLEPOST=1414369561][/DOUBLEPOST]My afr gauge is reading really rich.

the best way to help you is going to be looking at your log. since it has been changed from a stock tune you will want to start there. plus you can see if any sensors are out of wack with a crazy reading

TalonFULLtune said:

the best way to help you is going to be looking at your log. since it has been changed from a stock tune you will want to start there. plus you can see if any sensors are out of wack with a crazy reading

Click to expand...

OK I'll try and get one up asap.