The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support RTM Racing
Please Support ExtremePSI

New Build

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

97_Diamond

Probationary Member
11
0
Feb 15, 2013
Las Cruces, New_Mexico
Hey guys.
While i am not particularly new to the site, i do have a new project to introduce.
I just bought a 97 GST shell that i couldnt pass up.
I traded it for evo 8 enkeis & $250 LOL.
This car will be a daily and a track car. I will race it at ASR in Deming upon completion.
The build so far goes as follows:
•6 bolt block
•2g head
•2g pistons with 1g rods to keep comoression at 8.5:1
•ARP Hardware
•60mm tb
I plan to run a 16g and tune it on e85 once done.
Not getting too crazy with the power im shooting for 350-375. With 400hp being max. Will post pics up later
 
Yeah you got a pretty good deal. Welcome
 
Sounds like you have a plan laid out for sure do you have a set budget for the build/project? I've always found it west to set a budget and stick to it to accomplish my goals better than to wing it and not have the last couple parts due to frugal spending on something I didn't quite need yet. Good luck!
 
Thanks and i really dont have a budget laid out. Since i want it to be a daily & a weekend warrior im looking for the parts that best work together. Its not a power hungry build. Once i have it all figured out i will establish a budget. For now the plan is not to exceed $5k. Including cost of the car ($600 LOL)[DOUBLEPOST=1414181282][/DOUBLEPOST]
You must be logged in to view this image or video.

97 GST shell
You must be logged in to view this image or video.

6 bolt block
2g head/cams
2g intake manifold
You must be logged in to view this image or video.

1g rods/2g pistons w/ARP hardware
got both sets for $60 haha
 
Last edited:
Nice grab on the pistons!
I'm right there with u. My build is basically the same weekend warrior point a-b car. 1g talon. Just buttoning up the newly rebuilt 6bolt. Looking forward to seeing this thing progress
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top