RedVengeAPX
Supporting VIP
- 124
- 13
- Oct 30, 2006
-
Richmond,
Virginia
stock wheels, 16 inch, and yes. i know it won't fit after i put brembo brakes on. so gotta order a new set of 18X10 cv3s with neova tires. .[DOUBLEPOST=1411479271][/DOUBLEPOST]
Sorry if ive said some mis information. I had it in my head that everyone tapped the caliper and thats why lots didnt want to do that.[DOUBLEPOST=1411485844][/DOUBLEPOST]
No one listen to me
Just so I am clear on your intent with all of this, getting the knuckles so you don't have to grind any of the brembo calipers which you stated you did not want to do...cost to much, but a new set of wheels and tires is within the budget for this mod? If thats all good then why not also look into swapping your GST brake master out for a slightly larger GSX or 3G with a booster and while everything else is disconnected put some SS lines on.
I thought with the original KMV brackets there was some tapping as well, not on the caliper but on the bracket itself, to get the bracket to hold to the ear of the knuckle.