The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support Rix Racing

2G 1998 gst build

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

PearlSweatshirt

Proven Member
140
2
Dec 10, 2013
Georgetown, Kentucky
Hey guys. I just recently bought my dsm a few weeks ago. And am looking for some feedback on where I can start with my build. All of the internals are bone stock. The block is fairly new and iam just trying to make a decent pull car out of it. If anyone could message me or comment with any kind of help I would much appreciate it.
 
This is my current setup
 

Attachments

  • image.jpg
    image.jpg
    40.6 KB · Views: 68
Showing a picture will not help us determine what your current setup is but a list of what you have done or what the previous owner did would. Here is a small list of cheap mods:14b or 16g, evo injectors, walbro 255, fpr, wideband, SAFC, FMIC with piping.
 
Showing a picture will not help us determine what your current setup is but a list of what you have done or what the previous owner did would. Here is a small list of cheap mods:14b or 16g, evo injectors, walbro 255, fpr, wideband, SAFC, FMIC with piping.
I said when I posted that he not me has done anything aftermarket to car it is boneeee stock[DOUBLEPOST=1411065491][/DOUBLEPOST]
Recirculate your bov!!!!
Why recirculate?[DOUBLEPOST=1411065912][/DOUBLEPOST]The guy I bought the car off of will be no help. Didn't even know what psi he was running..
 
Last edited:
Because you don't have the proper setup to run a vented bov. You are only hurting performance running it vented! Your ECU is expecting that air to be there and when it's not it can cause a rich condition during shift. The only time you can run vented is when tuning with a blow thru style maf or speed density!
 
Because you don't have the proper setup to run a vented bov. You are only hurting performance running it vented! Your ECU is expecting that air to be there and when it's not it can cause a rich condition during shift. The only time you can run vented is when tuning with a blow thru style maf or speed density!
Thanks you for the help I will get that taken car of. Do you have any other suggestions? Cause idk WTF the precious owner did to this car tbh. I don't even think he knew[DOUBLEPOST=1411067672][/DOUBLEPOST]Previous*
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top