here are some pics of the turbo. it does have an FP stamp in the housing

Not a hta68.

Probably some kind of billet 20g with an fp housing.

dsmaz said:

here are some pics of the turbo.

Click to expand...

Billet 18G or 20G depending on the inducer spec...appears to be a Snail Turbo billet wheel.

dsmaz said:

it does have an FP stamp in the housing

Click to expand...

That's not even CLOSE to being a FP logo.

it appeared to be an fp logo but i could be mistaken. I was told it was a 20g 68hta but i guess it can only be one of the two. so im guessing its just a billet 20g then?

it does have evo3 hotside 70 ar

as long as i can reach my 400whp goal ill be happy with this thing

Its not a .70 AR, its 7cm2, thats what the 70 means on a Mitsu housing like that.

well it say AR.70 right on the damm thing

dsmaz said:

it appeared to be an fp logo but i could be mistaken. I was told it was a 20g 68hta but i guess it can only be one of the two. so im guessing its just a billet 20g then?

it does have evo3 hotside 70 ar

as long as i can reach my 400whp goal ill be happy with this thing

Click to expand...

You can guess all day long or you can measure the wheel and know what it is.

If it is a 20g, 400hp is no problem.

If people don't stop wining, we are gonna loose a very good Vendor, in fact i believe the number one in customer service.

We would just watch it steer away.

As long as they keep their customer service the way it is, I'm all good.

kidtsi said:

If people don't stop wining, we are gonna loose a very good Vendor, in fact i believe the number one in customer service.

We would just watch it steer away.

As long as they keep their customer service the way it is, I'm all good.

Click to expand...

I was not whining. I received something that was not as advertised and wanted to know what I had. At the time of purchase, FP still had it advertised as a TD05h turbo. I have never had any issues with FP and their service. No disrespect to anyone here on DSMtuners or at FP.

well thanks for your help guys!!

when i go by a micrometer i will post the specs to see exactly what i got here

dsmaz said:

well it say AR.70 right on the damm thing

Click to expand...

Mislabeled Chinese turbine housing....that's their misinterpretation of the "070" cast into factory housings, which means 7cm2 or .49 a/r.

Hope you didn't pay too much for this gem.

I traded a set of used cams and 200 for this turbo.

It doesnt have an "070" on it, it had ar.70 on it. Says the same as my other 14b with evo hotside

dsmaz said:

It doesnt have an "070" on it, it had ar.70 on it. Says the same as my other 14b with evo hotside

Click to expand...

Right-on....you're right, I'm wrong. You apparently have the only .70 a/r TD05H DSM turbine housing(s) in existence.

The Chinese hot sides have ar 70 on them. The mitsu hot sides have 070.

JusMX141 said:

Mislabeled Chinese turbine housing....that's their misinterpretation of the "070" cast into factory housings, which means 7cm2 or .49 a/r.



Hope you didn't pay too much for this gem.

Click to expand...

I'll just bring this back to op's attention.

im not trying to say im right and your wrong. Im just trying to describe this thing the best i can since its not right in front of your face.

obviously if i knew what this turbo was i wouldnt be asking for your help. And im not claiming to be a know it all so u guys dont have to get all mad

Well it's prob not an fp turbo at all to answer your threads question no ones mad