rubber hose from gas tank to filler neck

etay89 · Aug 2, 2011

so right now, I'm in the midst of an awd swap. the original/donor car is a 99 gsx. the new body is a 97 gst. when I was removing gas tanks from both, I was able to remove the hose from the gst in tact but .I had to cut the gsx. any rate, the gst hose is too narrow and not long enough and the original is obviously cut.

I tried calling the Mitsubishi dealer local to me and he hasn't gotten in contact. is there any possible hose or something that I could use? I wanted to use radiator hose but people tell the gas will eat thru it

JusMX141 · Aug 3, 2011

Local parts stores (NAPA over Pep Boys and Advance) should offer flexible fuel filler hose that is reinforced with wire in a variety of diameters either sold in lengths or in bulk (to be cut).

You must be logged in to view this image or video.

Get a close idea of the diameter and length, then visit your local parts store- they should be able to help you out. :thumb:

etay89 · Aug 3, 2011

jusmx141 said:
Local parts stores (NAPA over Pep Boys and Advance) should offer flexible fuel filler hose that is reinforced with wire in a variety of diameters either sold in lengths or in bulk (to be cut).

I've been calling different places and have been generally getting a no. I've asked for different recommendations and they keep saying that the gas will eat through it.

Napa was the first place I called, but I'll gladly try again. Thanks again Justin :thumb:

Lucky13 · Aug 3, 2011

I found larger fuel line sizes at West Marine. I imagine any place that has parts for boats would carry it. Not really cheap though....boat guys get shafted pretty good it seems.

etay89 · Sep 2, 2011

Here was my solution (for anyone who ever gets stuck in this predicament)

If you have a Base/RS/GS/GST Eclipse/Talon of the 2g variety, you need a hose with a 1 3/4 inch inside diameter. This can be found at West Marine easily or any boat store that would carry such a part.

GSX owners need 2 inch diameter hose. This MAY be able to be found at West Marine or a local boat store but in case it isn't, here's where I ordered mine:
Universal Filler Neck Hose 2" Inside Diameter - iNeedParts.com

2slow4now · Sep 2, 2011

I was in the same boat trying to figure out what to use. I finally just got went with an online mitsubishi dealer and just looked up the right hose. It was fairly reasonably priced. You may want to check with JNZ tuning. Its always nice to support the companies that give dsm's some love.

3kgt2nv · Sep 2, 2011

Maperformance and jnz havent had any luck finding one for me

2slow4now · Sep 2, 2011

Its been awhile since I got mine but it was a mitsu dealer from washington I got mine from. Let me see if I can find it.

I think this was them. http://www.partswebsite.com/courtes...tid=30197&subcatid=33111&section=6&type=parts

This is the one from washington cheaper too. OEM for $9 plus shipping
http://www.trademotion.com/partloca...ipse&year=1997&catalogid=2&displayCatalogid=0

91stocker · Sep 2, 2011

Just ask for a universal 90 gas line. Cost me $18 at the local autoparts.

2slow4now · Sep 3, 2011

3kgt2nv said:
Maperformance and jnz havent had any luck finding one for me

https://www.jnztuning.net/oempartscat.html

Thats funny they are in the catalog.

3kgt2nv · Sep 3, 2011

whats the part number im not sure if its the filler hose or filler tube i need

2slow4now · Sep 3, 2011

The hose is the flexible rubber line. Large is the actual fill and small is the vent. The tube is the metal part coming from the gas cap.

Ghost_92TSi · Mar 31, 2014

You must be logged in to view this image or video.

Will this work for the 1g as well? I need part #32 but I don't know exactly what to call it, nor found a part number. I put on mudflaps and a screw wandered a little too close and clipped it. rather be safe than sorry.

pauleyman · Mar 31, 2014

Part 32 is long out of producton. Go to an auto store and find an appropriate sized 90 degree fuel hose. Do NOT use radiator hose. Use fuel hose. It exists. I did it ten years ago.

Ghost_92TSi · Apr 1, 2014

Thank, do you know they Diameter (ID or OD)?

3kgt2nv · Apr 10, 2014

http://www.dsmtuners.com/forums/art...uel-filler-rubber-connecting-boot-1g-awd.html

The Top DSM Community on the Web

rubber hose from gas tank to filler neck

etay89

JusMX141

etay89

Lucky13

etay89

2slow4now

3kgt2nv

2slow4now

91stocker

2slow4now

3kgt2nv

2slow4now

Ghost_92TSi

pauleyman

Ghost_92TSi

3kgt2nv

Similar threads

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds