The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Kiggly Racing
Please Support Rix Racing

Rwd swap wiring help

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Ace_gst

10+ Year Contributor
217
0
Mar 19, 2011
Corcoran, California
Hey every one I am doing a rwd swap in a 280z. I have a quick question on the wiring, I need to know what to do with plugs c57 c58 c67. They plug into the chassis harness under the dash of the 1g. Will i need to pull all the 1g's dash harness along with engine harness. I'm pretty sure some go to the obd port from there and I would like to keep that, any help would be appreciated.

No wiring guru's wanna chime in?

Ok let me put it this way for ya guys, what all do I need besides the engine harness for the motor to run in a car with no other harness or wires.
 
Last edited:
Hey Ace, I think i may have finally found an answer to what we are both looking for. 4G63 | HotrodCoffeeShop

It is going to have to be completely rewired from what i gather... I will be trying the wiring once i get a hold of a 91-94 ecu, hopefully eprom.

I really hope this is the diagram that we need to get our beasts on the road!:rocks:

Its about half way down the page.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top