The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support STM Tuned

where to $ avid motor mounts

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Scoobystyl

10+ Year Contributor
277
1
Nov 5, 2011
Denver, Colorado
Where can i find the avid racing billet motor mounts for an automatic 2g? or can i use the manual mounts?
 
Extreme psi is sold out and stm wants 400 compared to extreme at 300 and they only have 75a and I want 90a ill check out jnz though
 
Oh nice well if thats the case ill have to call them Monday
 
Good Luck! From what I heard Avid went out of business. I sent them some money last summer for some mounts, and they been avoiding me ever since. A member on here black_gst just made a batch of the roll stops for us autos. Hit him up or look for the threads on them. They are good quality inserts.
 
I dont want to use stock mounts or find another that i lost somewhere...
 
Good Luck! From what I heard Avid went out of business. I sent them some money last summer for some mounts, and they been avoiding me ever since. A member on here black_gst just made a batch of the roll stops for us autos. Hit him up or look for the threads on them. They are good quality inserts.

Last summer I bought a pair of mounts from them. I do not know what you are talking about sir. Avid Racing | Engine Mounts | Traction Bars | Components

https://www.facebook.com/AvidRacing

Judging by they're website still being up and their Facebook page still remaining I wouldn't put money on them being out of business.
 
I had an issue with the rear mount for my 1G auto. The mount was at least one inch too tall. I contacted extreme psi as well as Avid about this, the problem was never resolved by either party. This was a couple years ago. The trans and timing belt sides were fine. Also even with the 90a softer bushings it is a PITA to install, take off and reinstall.
 
Last summer I bought a pair of mounts from them. I do not know what you are talking about sir. Avid Racing | Engine Mounts | Traction Bars | Components

https://www.facebook.com/AvidRacing

Judging by they're website still being up and their Facebook page still remaining I wouldn't put money on them being out of business.

Did you try and contact them too? there are many websites that are still active even though the company's don't exist anymore. Same thing with facebook. I have 3 accounts and no body validates them either.

That was last summer. A lot has happened to the economy since then. I have even contacted Extreme PSI and they cant even get ahold of them. I have directly contacted Avid (via email) and they keep giving me numbers that no one will answer too. I have sent various emails and they keep giving me the run-around telling me to contact another person in there corporation.

Long story short, bad business all around. I bought some others from a another member/vender on the site, without the headache and hassle.
 
I got a 4 piece set from JNZtuning. I eventually called Avid Racing and ordered a complete set of urethane inserts in the lower durameter, because the highest durameter was just too harsh.
 
You got a number for Avid? Can you PM it to me?

Much appreciated...
 
That's what I figured. I think they are having business issues and might be going under...
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top