mrfister11
10+ Year Contributor
- 167
- 1
- Oct 19, 2010
-
clinton,
Missouri
ok i bought a 4g64 from someone.. it has 4g64 stamped into the back side.. came with just a crank. what happened was the front balance shaft spun the bearing inside the block and ruined the rest.. so i had the crank fixed. it is a 7 bolt. and put some rods and pistons in it and bought a new oil pump for a 7 bolt 4g63. the issue is the alternator mount does not line up with oil pump.. FYI the 4g64 and 4g63 engine that came in DSMs all had the same part number for the oil pump from the parts store(easy way to check). Now i did find a thread on here in which someone had the exact same issue as i did with a car they knew nothing about but it was a dead end.. ALOT of wrong information in that thread that was tossed around and the last post not clearing anything up. also this engine has knock sensor on the front side. idk what this is out of
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.