I'm building my cylinder and and debating on which springs and retainers to go with. The Bc1100 or manley's kit. Help me decide...

Maybe this will help:

http://www.dsmtuners.com/forums/cyl...2-evo-viii-stock-dsm-manley-brian-crower.html

It helps to know what camshafts you are going to run.

DKS 272's.

It is no secret, I install alot of the BC1100 springs.

With the DKS272, the BC1100 will work just fine.

Just shoot Darren an email! He will give you his opinion with no BS.

BogusSVO said:

It is no secret, I install alot of the BC1100 springs.

With the DKS272, the BC1100 will work just fine.

Click to expand...

You use BC parts? I thought the BC stuff shouldn't be touched with a ten for pole?

renovatdkitchen said:

You use BC parts? I thought the BC stuff shouldn't be touched with a ten for pole?

Click to expand...

Last 6 of the 8 engines sent out have BC272 cams.

I have lost count on how many heads I have installed BC1100 springs on.

2 New builds are getting BC con rods, 6 bolt rods with 22mm wrist pins.

3 EJ25 all running BC rods.

I have used BC in MR2 builds and 2JZ.

I have been using BC products pretty solid now for 5-6 years.

I have BC dual vAlve springs BC276/276 and a revised set of BC cam gears. I'll be running them. Granted they were supplied to me..

Their quality control has gone way up imo...

Huh. Next time I come across some cheap BC parts, I'll give them a try in the 1G.

I never met or work with BogusSVO but he seems to know he's stuff and if he says BC parts are good I trust him. But I can't stop to think of STM statement about they not recommending that brand.

The dual springs are supposed to be like the supertech's and good for 10krpm

Thank you DUSTIN213 that was really nice of you and I will sure keep you in mind for my cyl. Head building.

^ wrong thread?

urbansmoker1 said:

^ wrong thread?

Click to expand...

Urban you catch everything!

I get bored.