What did you do to your DSM today?

LandSpeed-DSM · Nov 23, 2013

Yup, so the knob was disconnected, but the friction from the O-ring keeps it from falling off and feels like its turning

Can't wait to have a rotating assembly that can handle that much boost from a turbo more like this, more than once or twice that is

Click to open videos.

20psi Test:

You must be logged in to view this image or video.

38psi spike:

You must be logged in to view this image or video.

Doubleot · Nov 23, 2013

Installed new parking brake shoes with new hardware, new rotors and on Monday some new pads.

pksystems · Nov 26, 2013

Took a look at the bubbling paint on front strut tower.

Looked like surface rust till I took a flat head to it.

Now I have a hole to fix. :ohdamn:

OZRallyEdition · Nov 28, 2013

I swapped my dinged up left fender

ryztriumph · Nov 28, 2013

I thought you guys may appreciate this. Not on my dsm, but my junker, an 88 Chrysler, buttoned up the new Lucas 20/20s and finished painting the top and hood.

You must be logged in to view this image or video.

airmail96 · Nov 28, 2013

Wow thing looks like it is ready to do work LOL

Took off my old valve cover took out the stock cam shafts and threw in the new fp2s and buttoned her up with a new valve cover start

You must be logged in to view this image or video.

Finish

You must be logged in to view this image or video.

Bud92gsx · Nov 28, 2013

ryztriumph said:
I thought you guys may appreciate this. Not on my dsm, but my junker, an 88 Chrysler, buttoned up the new Lucas 20/20s and finished painting the top and hood.
You must be logged in to view this image or video.
You must be logged in to view this image or video.

Thats driving mrs. daisy style :thumb:

crash89 · Nov 29, 2013

Pushed my piece of shit to the side of the road because it all the sudden just felt like dying on the way home. Drove fine all friggin summer, let it sit for a couple weeks and now its bein a friggin jew. Of course I cant drive this thing on a holiday and not have it break on me. Happens almost everytime!

Tore a wrist pin out of a piston the last time I drove it on New Years.. Never again.

99ECLIPSEGSXDSM · Nov 29, 2013

Lesson here is never drive your Dsm when you NEED to be somewhere. Unless its the shootout LOL

j/k

iiNFAMOUSCHRiS · Nov 29, 2013

You must be logged in to view this image or video.

sold it.

Ghost_92TSi · Nov 29, 2013

sad times ^

Worked on my motor yesterday. Got all the lifters, rockers, cams on, and all the timing parts

You must be logged in to view this image or video.

crash89 · Nov 30, 2013

crash89 said:
Pushed my piece of shit to the side of the road because it all the sudden just felt like dying on the way home. Drove fine all friggin summer, let it sit for a couple weeks and now its bein a friggin jew. Of course I cant drive this thing on a holiday and not have it break on me. Happens almost everytime!

Tore a wrist pin out of a piston the last time I drove it on New Years.. Never again.

Spent yesterday morning rolling on the ice and snow to figure this out. Started by lining up the timing marks, whoops theres the issue. Bolt securing the timing sprocket was lose. Trigger plate took out the crank sensor. Managed to finagle a new one in without having to pull the timing belt. Boom, fired right up.

Bud92gsx · Dec 1, 2013

I put all my shit together, im having a buddies shop pick the car up..And put it back to before I ripped the head off..

I'm worried..I've never had sumone else touch it all over like that.

Archer Fabrications · Dec 1, 2013

Paul walker died yesterday RIP

gofer · Dec 1, 2013

...yesterday, actually.

tooturbugg22 · Dec 1, 2013

I modified my fog lights to turn on with the park lamps instead of the headlights

Bud92gsx · Dec 1, 2013

urbansmoker1 said:
Paul walker died yesterday RIP

gofer said:
...yesterday, actually.

Canadian internet must be almost 24 hours behind the US. LOL

Archer Fabrications · Dec 1, 2013

I didnt get on the net at all yesterday

pksystems · Dec 1, 2013

Picked up 3g tubular rear upper control arms, and sway bar from pick n pull

Dropped rear subframe/knuckles/diff/axles

Hideki · Dec 1, 2013

Changed the oil and pcv valve, no big deal

95GreenTalon · Dec 1, 2013

I cleaned the whole motor. Changee my gaskets gonna change my cam seals and start sanding to paint daytona blue.!

my dreamt dsm · Dec 3, 2013

Installed poly mounts, shifted my motor forward towards the radiator causing my j pipe to rub on my rad fan. So I dremel sanded the edge of the fan, not it not hit, now it good. Me happy!
I was stressing about spending money to buy slims, but my solution worked better.

pksystems · Dec 3, 2013

Spent 3 hours removing passenger rear toe arm. :banghead:

One down, one to go. Couple tiny nicks from a cutoff disc.... Hopefully I didn't bend the subframe.

Blindmouse · Dec 4, 2013

Monday was the "Day one.."

You must be logged in to view this image or video.

pksystems · Dec 4, 2013

Received a Fedex package from Malaysia.

Evo 3 clutch type rear LSD :hellyeah:

The Top DSM Community on the Web

What did you do to your DSM today?

LandSpeed-DSM

Doubleot

pksystems

OZRallyEdition

ryztriumph

airmail96

Bud92gsx

crash89

99ECLIPSEGSXDSM

iiNFAMOUSCHRiS

Ghost_92TSi

crash89

Bud92gsx

Archer Fabrications

gofer

tooturbugg22

Bud92gsx

Archer Fabrications

pksystems

Hideki

95GreenTalon

my dreamt dsm

pksystems

Blindmouse

pksystems

Similar threads

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds