2g TB Elbow to BOV...where did you get your intake hose?

4gfun · Nov 19, 2013

Seems to be more trouble than it's worth to size it and waste gas trying to figure it out locally. If no one has an answer, I'll just get a stocker and sell the 2g elbow.

Thanks

1990dsmkid · Nov 19, 2013

if your are talking about the coupler to connect the elbow to ic pipe then I got mine off ebay. I believe the elbow is 2in and the other side is whatever size your pipe is.Hope this helps

hhuricane · Nov 19, 2013

Most people who did this switched to a hard pipe. Before I got my hard pipe I just used an exhaust adapter and a piece of water hose at the elbow to make it fit the stock hose cut to length.

4gfun · Nov 19, 2013

hhuricane said:
Most people who did this switched to a hard pipe. Before I got my hard pipe I just used an exhaust adapter and a piece of water hose at the elbow to make it fit the stock hose cut to length.

Where did you get a hard pipe? Also, this part seems like a not worthy mod since it will be necked back down to the same diameter once it hits the BOV. Thoughts on that? Thanks

4gfun · Nov 19, 2013

1990dsmkid said:
if your are talking about the coupler to connect the elbow to ic pipe then I got mine off ebay. I believe the elbow is 2in and the other side is whatever size your pipe is.Hope this helps

Missed this post. Talking about the 2g hard elbow that comes right off the TB and then makes it's first stop at the BOV.

hhuricane · Nov 19, 2013

Built my own. I'm not sure who sells them anymore. I'm sure one of our vendors still has them available.

AwD4g63TsI · Nov 19, 2013

I've got a set of hard pipes for 2g. Check the classifieds, I think my ad is still up.

The Top DSM Community on the Web

2g TB Elbow to BOV...where did you get your intake hose?

4gfun

1990dsmkid

hhuricane

4gfun

4gfun

hhuricane

AwD4g63TsI

Similar threads

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds