iPyromaniacC42
Proven Member
- 63
- 0
- May 24, 2013
-
pueblo,
Colorado
wow amazing build i love the detail you had in the pics
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Nice build I see your a few miles down the street.
This is a clean car man looks awesome. Would love to see some numbers whenever the build is complete
phenomenal journal Id like to restore my car as well, when you got into cleaning up the subframe components did you grind off the rust?or how did you remove your rust on your underbody ?
What was the benefit of porting the oil filter housing? Have you considered the AMS balance shaft kit ( AMS 4G63 Race Balance Shaft Eliminator Kit - Modern Automotive Performance )? I had the stubby eliminator and it didn't allow my oil pump gear to stay aligned and it locked up the oil pump. I was thankful if didn't ruin my engine. I noticed there appeared to be no room for cooling fans, how will you mount them? I know its a little late now but i highly recommend installing two -10 fittings in place of the valve cover vent and PVC locations with vacuum lines sucking from a oil catch can from the turbo compressor inlet to allow the proper ring flex and no crank case pressure under boost. IMO
Good article to read!
Keep Your Balance Shafts – Jacks Transmissions LLC
http://www.dsmtuners.com/forums/articles-engine-fuel/319342-oil-pressure-relief-valve-porting.html Here
And for other goodies too try http://www.dsmtuners.com/forums/articles-miscellaneous/450429-bogussvo-how-links-other-info.html
Sick build by the way!
This is a really awesome build, nice attention to detail. That bumper just needs about two inches trimmed of the inside lip that touches the intercooler core and it won't sag and flex anymore
Yeah a hour or so sim has a new shop if your in town check it out, sometime and hit me up id love to see your car and talk dsm.
I just skimmed pictures but looks great. What I did to get rid of the gap between the ic and front bumper was drilled small holes through the lowest part of the bumper and ran zip ties through my intercooler and the holes. The top part of the bottom section cover the bottom of the ic and the zip ties.
Yes they have a really nice shop now and a great location on westnedge avenue, sim will be doing some work to my dsm as well tuning it. They service all kinds of cars subies, Hondas, and dsms and all sorts of stuff and they have a dyno too.