The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Rix Racing
Please Support STM Tuned

fp2 intake cam only

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bcjjones

10+ Year Contributor
509
4
Nov 3, 2011
Austin, Texas
Would I be able to run a comp cam 101200 (fp2 ) intake cam with the stock exhaust cam? Would there be any problems/adverse affects to doing this?

Or would running the stock cams be best until I get my fp2 exhaust csm fixed?


Basically I'm trying to figure out if ill benefit from running the fp2 intake cam with the stock exhaust?
 
depends on what stock cam you have.

Yes the car will run on a stock exhaust and a FP intake
 
Its a stock turbo exhaust cam from a 1991 galant vr4...will I benefit from running the fp2 intake vs the stock intake?
 
Up by #1 cam journal, there is a large letter, What is it?
 
Thats the basic stock cams, not one of the bigger ones.
 
Thank you. So running the fp2 intake with the stock exhaust cam I have wouldn't benefit me at all?
 
Sorry, I was thinking B cam, not A cam, It has about 360 lift and a 244* duration, the A cams have more lift than most of the stock cams.

The G exhaust, if you can find it would be a decent fit
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top