907dsm
10+ Year Contributor
- 480
- 4
- Jun 13, 2009
-
Anchorage,
Alaska
Let them post up, this is "YOUR" most recent welding pix
Oh hush!! Just because you post like every five seconds in this thread others can post teaser pics of good work.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Let them post up, this is "YOUR" most recent welding pix
My exhaust rusted out in only 3.5 years, so I bought some T409 stainless and started over. I did this with a millermatic 140, 100% argon, and stainless wire.You must be logged in to view this image or video.You must be logged in to view this image or video.You must be logged in to view this image or video.You must be logged in to view this image or video.
It may be ugly, but it's airtight.
Those are lookin real good, makes me more apt to get a sheet metal bender. I just got some sheet metal to make a bench for my garage so i can have a grounded work surface. In the middle of a move, being a home owner and having a garage are awesome. After i get a 60 gallon compressor I'll be posting up more welding pix
I'm not a fan of the red leaver drain but the other two are good to go!
Gamble Put my IC up for all to see my new toy.
It's much much nicer! Just turn and be done. I really don't like the other ones to be honest. It's awesome having your own garage. Do yourself a favor and insulate it really well for winter. And a nice heater and a/c unit.
Also look at garagejournal.com for some cool stuff. My garage is on there someplace.
Will do. Just need to figure out how to do a bracket. And get my welder setup and it should be done shortly.
Also need to buy stuff for boost leak test. Unless you have one you want to mail me for 2.5"?
Anyone got tips on how to make a sheet metal bender? Like out of angle iron or somethin? Or got links for a cheap good one?