Im looking for a 6 bolt standard bore block. It has to be standard so I can bore it.20 over call or text me anytime thands 209 507 5818

tsi209 said:

Im looking for a 6 bolt standard bore block. It has to be standard so I can bore it.20 over call or text me anytime thands 209 507 5818

Click to expand...

i have one. text you in a bit

ALLOUT CL55 said:

i have one. text you in a bit

Click to expand...

Please let me know asap and info on the block to make sure it is standard bore. Thanks

You have 2 already how many do you need?

TSimage said:

You have 2 already how many do you need?

Click to expand...

Lol I need one thats 85mm so I can bore it to 85.5mm. The 2 I have are 85.5 and need to be bored to 86mm witch I think is .30 over. I cant use the ones I have

Are the cylinders out of round or are the cylinder walls damaged? If not, a light hone will clean it up and still should keep it within limits to reuse.

1SloEvo said:

Are the cylinders out of round or are the cylinder walls damaged? If not, a light hone will clean it up and still should keep it within limits to reuse.

Click to expand...

The machine shop said it would be best to just bore it. I dont want to risk it and have to much clearance and have the pistons slap. I just want to be sure its done right

If you can't find one, I have a virgin bare block.

miguelmcv said:

If you can't find one, I have a virgin bare block.

Click to expand...

How much and where are you located? Text me please

Text sent.

You still need a block.
does it matter if it has oil jets or not.

mitsubishikid said:

You still need a block.
does it matter if it has oil jets or not.

Click to expand...

I just got one from Miguel. But I wouldn't mind having a back up block. How much are you looking to get for it?